"HOW TO" GUIDES
TIMER How to PROGRAM a Digital Immersion Timer
Download
Features
  • Ideal for immersion heaters, towel rails and lighting
  • Battery backup in the event of power failure
  • 24 hour, 7 day control
  • Two fixing points
1.
Push down the red segments on the timer face corresponding to the operating time needed. One segment is equal to 15 minutes.
2.
Turn the central clock face so that it is the current time, or rotate the outer disk clockwise so that the solid black arrow points to the current time.
3.
To activate the timer function, ensure that the switch on the front face is down.
4.
For manual override, to switch on the heater, move the switch to the up position so that it indicates the ON symbol (I)
5.
The LED indicator will illuminate to show that the power is being supplied to the connected equipment.
safety instructions
  • DO install in accordance with local building regulations
  • DO use in accordance with the wiring instructions
  • DO use cable of correct rating, size and type, to prevent fire hazard
  • DO NOT exceed maximum load of 3840 Watts, 16(2)A
  • DO NOT immerse in water. If cleaning is required, wipe with a dry cloth
  • DO NOT use if damaged
  • DO NOT use outdoors
If in doubt consult a competent electrician
specifications
Operating Temperature: 0°C to 40°C Operating Time: Continuous
Operating Voltage: 22-240V 50Hz Pollution Degree: 2
Max Load: 16(2) A Rated Impulse Voltage: 4 kV
Switch Type: 16A relay Temperature of Ball Pressure Test: Category D
Terminal Capacity: 1.5-2.5mm2 Flexible Cable Power ON light: Yes
Time Period: 7 day Output Light: Yes
environmental protection
This symbol is known as the ‘Crossed-out Wheelie Bin Symbol’. When this symbol is marked on a product or battery. It means that it should not be disposed of with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environment. Only dispose of electrical/electronic/battery items in seperate collection schemes, which cater for the recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these schemesand for the protection of the enivironment.

All images used on this website are subject to copyright © Luceco plc and other image rights holders where applicable. Reproduction prohibited unless prior permission is granted by Luceco plc in writing.